LKTC-G系列485通讯程序温控表适用于工业实验室仪器如各式干燥箱、烘箱、烤箱、老化箱、电热板、COD消解仪、水浴油浴等工业实验室设备。
Application: laboratories like various drying ovens, aging ovens, electric heating plates, COD digestive instrument, water or oil baths, etc.
产品概述 Features
LKTC-G系列485通讯程序温控表是智能温度控制仪表是高性能、高精度的温度控制模块。具有稳定可靠、精度高、使用方便等优点。其特点如下:
①采用自研PID模糊算法控温,控温效率高,升温快,温度浮漂小;自适应PID,一键自整定。
②可控硅输出,继电器保护,可再扩展2路输出,满足加热风机/循环等需求。
③探头自检测,脱落报警。超温报警(范围可设置)保护。
④带99段可编程, 温度多点温度斜率校准。
⑤数值电路,稳定准确,抗干扰能力强,高低压分离, 安全可靠。
⑥扩展:支持标准RS485等通用接口,可配置MODBUS RTU 通讯协议,一台主机控制多套设备,EEPROM存储下载,数据自采集。可接上位机软件,查看历史实时数据或者曲线。
①Intelligent PID fuzzy temp.control with adaptive PID self-tuning,higher temp. efficiency,more accuracy and smaller temp. drift.
②Probe self-detection,detachment&over temp.alarm protection.
③24A or 41A SCR output,30A relay protection,scalable 2-ways 5V SSR.
④99 programmable segments,temperature multi-point slope calibration.
⑤standard RS485 ModBus RTU protocols,EEPROM for data storage and download, data self collection, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control or view actual-time&historical data and curves.
技术参数 Technical Parameter
测量范围 0℃~+400℃
Temperature measurement range
分 辨 率 0.1℃
Display resolution
测量误差 ±0.1℃
Inaccuracy of measurement
输入方式 PT100
Input mode
输出方式 24A或41A可控硅输出,30A继电器保护,可扩展2路SSR
Output mode 24A or 41A Silicon Controlled rectifier (scr) output, 30A relay protection,scalable 2-ways SSR
负载功率 0-2000W、0-4000W可选。
Load power 0-2000W or 0-4000W optional
程序段 99段可编程
Programming 99 programmable
定时范围 0 - 99小时59分钟
Timing range 0-99h59Minutes
电压范围 AC110-220V±15%
Supply voltage
通讯 标准485ModBus-RTU协议(选配)
Communication Standard 485 ModBus RTU protocol (optional)
测量值修正 -9.9℃—+9.9℃
Measurement correction
工作环境 -5℃—50℃,相对湿度35%—85%
Working condition Environment temperature:-5℃—50℃,
Relative humidity:35%—85%
外观尺寸 96mm*96mm
Exterior size
开孔尺寸 92mm*92mm
Hole size
http://www.lankai18.com/Products-38390513.html
https://www.chem17.com/st504187/product_38390513.html